06ASB38334B(0805D9013A-5)

Vendor:DONG-APackage Cooled:805D/C:05+

• Up to 6-A Output Current • 5-V Input Voltage • Wide-Output Voltage Adjust (0.8 V to 3.6 V) • Efficiencies up to 95 % • 135 W/in³ Power Density • On/Off Inhibit • Pre-Bias Startup • Under-Voltage Lockout • Operating Temp: C40 to +85 C

06ASB38334B239

D/C:07+

The SO-8 has been modified through a customized leadframe for enhanced thermal characteristics and multiple-die capability making it ideal in a variety of power applications. With these improvements, multiple devices can be used in an application with dramatically reduced board space. The package is designed for vapor phase, infrared, or wave soldering techniques.

06ASB38334B239(0805D9013A-10)

D/C:10000

• HiPerFET TM technology C low RDSon C unclamped inductive switching (UIS) capability C dv/dt ruggedness C fast intrinsic reverse diode C low gate charge • thermistor for internal temperature measurement • package C low inductive current path C screw connection to high current main terminals C use of non interchangeable connectors for auxiliary terminals possible C ...

06DB-6S

06DFT4T

Vendor:62

06DHEG3H

06FHJ-SM1-GB-TB

Vendor:J.S.TPackage Cooled:N/AD/C:06+

Up to 40 pins of the 80-pin QFP package can be dedicated to I/O. Six vectored interrupts provide fast response to internal and external events. In addition, the S3C72N8/C72N5's advanced CMOS technology provides for low power consumption and a wide operating voltage range.

06FLH-SM1-TB

Vendor:JSTD/C:.

06FLS-SM1-TB

Vendor:JSTPackage Cooled:08+D/C:1200

06FLZ-RSM1-TB

Vendor:JSTPackage Cooled:08+D/C:2000

The HYM72V32M636T8 Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The HYM72V32M636T8 Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth.

06FLZ-RSM2-TB(LF)(SN)

Vendor:JSTPackage Cooled:08+D/C:14000

06FLZ-SM2-TB(LF)(SN)

Vendor:JSTPackage Cooled:08+D/C:2000

06FMN-BMT-TFE001

06H6667

06K0424

Vendor:IBMPackage Cooled:BGAD/C:N/A

06K0596-PQ

Package Cooled:BGA

Analog Common Voltage Reference Pin ADC Common Voltage Reference Pin. ADC Common Voltage Reference Pin. Mono Channel Microphone Input Mono Channel 1st Amplifier Output Pin Mono Channel 2nd Amplifier Input Pin Mono Channel 2nd Amplifier Output Pin Please Connect 1nF capacitor. Left Channel D/A Out Right Channel D/A Out Left Channel Bass Boost Filter Input Pin Left Channel Bass Boost Filter Out...

06K0881

06K2549

06K3502

06K4018

06K4045PQ

06K4871

Vendor:IBMPackage Cooled:03+

06K4885PQ

Vendor:IBMPackage Cooled:PGA

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All v...

06K4885PQ

Vendor:IBMPackage Cooled:PGA

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All v...

06K5839PQ

Vendor:NEXABITPackage Cooled:BGAD/C:00+

06K6173

06K6246

06K6256

Vendor:AMCCPackage Cooled:CGA3333D/C:03+

It is an open drain output and may be wire-ORed with any number of open drain or open collector outputs. An open drain output requires the use of a pull-up resistor. For selecting typical values, refer to the guidelines for calculating typical values on the bus pull-up resistors graph.

06K6256

Vendor:AMCCPackage Cooled:CGA3333D/C:03+

It is an open drain output and may be wire-ORed with any number of open drain or open collector outputs. An open drain output requires the use of a pull-up resistor. For selecting typical values, refer to the guidelines for calculating typical values on the bus pull-up resistors graph.

06K6469PQ

Package Cooled:BGA

Note 5: The output pins RST and RST have an internal pull-up to VMAX of typically C6µA. However, an external pull-up resistor may be used when faster rise time is required or for VOH voltages greater than VMAX. Note 6: The input current to the three-state input pins are the pull-up and the pull-down current when the pins are either set to V1 or GND respectively. In the open state, the maximum leakage c...

06K6760ESD

06K8418

Package Cooled:N/AD/C:08+

2-cell 1.5V to 3.6V battery operation OCL mode for stereo headphone operation Unity-gain stable Click and pop suppression circuitry for shutdown On and Off transients n Active low micropower shutdown n Thermal shutdown protection circuitry

06K8418

Package Cooled:N/AD/C:08+

2-cell 1.5V to 3.6V battery operation OCL mode for stereo headphone operation Unity-gain stable Click and pop suppression circuitry for shutdown On and Off transients n Active low micropower shutdown n Thermal shutdown protection circuitry

06K8418PQ

Vendor:IBMPackage Cooled:CBGA2525D/C:00+

In the external drive mode the interdigit blanking time will be the sum of the negative dwell period of the external oscillator and the normal self oscillate blanking time. (310 µs). Dis- play brightness can be controlled by the duty cycle of the external scan oscillator.

06K8536PQ

Vendor:258Package Cooled:BGAD/C:00+

06K9223

Vendor:IBMPackage Cooled:BGAD/C:02+

06K9458

Vendor:IBMPackage Cooled:BGAD/C:N/A

06K9458

Vendor:IBMPackage Cooled:BGAD/C:N/A

06K9472PQ

06N03

Vendor:INPackage Cooled:30D/C:N/A

NOTES: 1. "H" = VIH, "L" = VIL, "X" = Don't Care. 2. CE0, LB, UB, and OE = VIL; CE1 and R/W = VIH. 3. Outputs configured in Flow-Through Output mode; if outputs are in Pipelined mode the data out will be delayed by one cycle. 4. ADS is independent of all other signals including CE0, CE1, UB and LB. 5. The address counter advances if CNTEN = VIL on the rising edge of CLK, regard...

06N03LZ

Vendor:Infineon

Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 3.5mH, IAS = 9.5A, VDD = 50V, RG = 25 Ω, Starting TJ = 25C 3. ISD 9.5A, di/dt 300A/µs, VDD BVDSS, Starting TJ = 25C 4. Pulse Test : Pulse width 300µs, Duty cycle 2% 5. Essentially independent of operating temperature

06N80C2

Vendor:INFINEOND/C:2001+

06N80C2

Vendor:INFINEOND/C:2001+

06N80C3

Package Cooled:08+D/C:2000

•Program control unit (PCU) •DMA controller (with six channels) •Instruction patch controller •PLL-based clock oscillator •OnCE module •Memory In addition, the DSP56371 provides a set of on-chip peripherals, described in Section 2.5 Peripheral Overview.

06-P39862P010

06-P39862P044

06PEA2L

06TI(AAU)

06TIAJR

Package Cooled:04+D/C:SMD

07.1.22

Vendor:K4D553235F-GC33Package Cooled:SAMSUNGD/C:05+

070-108/0

Vendor:AMTPackage Cooled:SOPD/C:01+

07-0115-0000

Package Cooled:N/AD/C:08+

0701-2548-0100

Package Cooled:QFP144D/C:00+

0702 2B

070206FR025S202ZA

070207FR015S231ZA

0702-MOO

Vendor:CMDPackage Cooled:BGAD/C:N/A

0702T

The 0702TB performs pulse shaping and filtering internally, which eliminates the need for external LCC filtering components and reduces overall system cost. EtherCoupler is compatible with shielded and unshielded twistedCpair cables and provides outputs for receive, transmit, collision and link test LEDs. The twisted pair receive threshold can be reduced to allow an extended range between nodes in low...

070543-0106

0705680U

Package Cooled:7M-680D/C:08+

A read cycle is initiated by the falling edge of CAS or OE, whichever occurs last, while holding WE HIGH. The column address must be held for a minimum time specified by tAR. Data Out becomes valid only when tRAC, tAA, tCAC and tOE are all satisfied. As a result, the access time is dependent on the timing relationships between these parameters.

0705-680U

Package Cooled:7M-681

07076-01

Vendor:ZILOGPackage Cooled:01+D/C:DIP-40

The host must issue a hardware reset or the soft- ware reset command to return a sector to the read array data mode if DQ[5] goes high during a pro- gram or erase cycle, or to return the device to the read array data mode while it is in the Electronic ID mode.

07097-11

07098-13

0709B

Vendor:N/APackage Cooled:06+D/C:500

070FE5

Package Cooled:PLCC84D/C:03+

070L125PL6S3

070VK01

Vendor:SHARPPackage Cooled:TO220-5D/C:08+

The X1 and X2 pins are the input and output, respec- tively, of an inverting amplifier that can be configured for use as an on-chip oscillator. A 32.768kHz quartz crystal is used. Recommeded crystals are Sieko VT-200 or Epson C-002RX. The crystal supplies a timebase for a clock/oscillator. The internal clock can be driven by an external signal on X1, with X2 left unconnected.

070VK01

Vendor:SHARPPackage Cooled:TO220-5D/C:08+

The X1 and X2 pins are the input and output, respec- tively, of an inverting amplifier that can be configured for use as an on-chip oscillator. A 32.768kHz quartz crystal is used. Recommeded crystals are Sieko VT-200 or Epson C-002RX. The crystal supplies a timebase for a clock/oscillator. The internal clock can be driven by an external signal on X1, with X2 left unconnected.

070VK02

Vendor:SHARPPackage Cooled:DIP5D/C:08+

070XH02

Vendor:SHARPPackage Cooled:TO263D/C:2007+

Six and eight channels of EMI filtering Utilizes Praetorian™ inductor-based design tech- nology for true L-C filter implementation OptiGuard™ coating for improved reliability 15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) 30kV ESD protection on each channel (HBM) Better than 40dB of attenuation at 1GHz Chip Scale Package features extremely low lead inducta...

070XH02

Vendor:SHARPPackage Cooled:TO263D/C:2007+

Six and eight channels of EMI filtering Utilizes Praetorian™ inductor-based design tech- nology for true L-C filter implementation OptiGuard™ coating for improved reliability 15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) 30kV ESD protection on each channel (HBM) Better than 40dB of attenuation at 1GHz Chip Scale Package features extremely low lead inducta...

070XZ01

Vendor:SHARPPackage Cooled:TO-252D/C:2007+

The DS1481 is a dedicated 1Cwire timing generator. The device is normally used in conjunction with a paral- lel port controller to provide the necessary interface to the host processor. Busy signals allow the host proces- sor to perform other tasks while 1Cwire timeCslots are completed. The DS1481 also saves the state of D/CLK and RES allowing print spoolers to operate without affecting 1Cwire commun...

070XZ02

Vendor:SHARPPackage Cooled:TO-252D/C:2007+

components. Extreme temperature conditions can be met since the converters can operate with full output power in ambient temperatures ranging from C45 to +85 C or up to +115 C case temperature, making the products ideal also for applications within various non-controlled environments. The PKA series is manufactured using highly automated manufacturing lines with a world-class quality commitment and a five-y...

070XZ02

Vendor:SHARPPackage Cooled:TO-252D/C:2007+

components. Extreme temperature conditions can be met since the converters can operate with full output power in ambient temperatures ranging from C45 to +85 C or up to +115 C case temperature, making the products ideal also for applications within various non-controlled environments. The PKA series is manufactured using highly automated manufacturing lines with a world-class quality commitment and a five-y...

070XZ1H

Vendor:SHARPPackage Cooled:252D/C:2005

General Notes: • All measurements are made at an ambient temperature of 25 C. IPP applies to -40 C through +85 C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VDRM is measured at IDRM. • VS i...

070XZ5M

Vendor:60Package Cooled:TO252-5D/C:04+

071.047.00

Vendor:VIPERPackage Cooled:DIP-16D/C:98

* This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.

071000127

07-1158-6

071206-RIZZI

0716261004

D/C:0804+

07187-4040182-906H

071AC

Vendor:TI

The Texas Instruments (TI) translation voltage-clamp (TVC) family is designed specifically for protecting sensitive I/Os (see Figure 2). The information in this data sheet describes the I/O-protection application of the TVC family and should enable the design engineer to successfully implement an I/O-protection circuit utilizing the TI TVC solution.

071BC

Vendor:N/APackage Cooled:SOP8

072454-020V

Vendor:N/APackage Cooled:310D/C:600

Power Diode Module DD200HB series are designed for various rectifier circuits. DD200HB has two diode chips connected in series and the mounting base is electrically isolated from elements for simple heatsink construction. Wide voltage rating up to 1,600V is available for various input voltage.

07263-HL50277

Vendor:FPackage Cooled:DIP16陶瓷D/C:85+

07263-HL78959

0728C

Vendor:STPackage Cooled:SOP8SD/C:2007+

• UL1577, File No. E76222 System Code W, Double Protection • CSA 93751 • BSI IEC60950 IEC60065 • DIN EN 60747-5-2 (VDE0884) DIN EN 60747-5-5 pending • FIMKO • NOTE: See the Safety Standard Approval List "Agency Table" for more detailed information.

072-96914-300

072AC

To preheat the lamp, the amplitude control feature of the IR21592 is used, which regulates the resonant tank current during the Preheat period. The VCO starts at maximum frequency and then decreases the frequency until the voltage at the CS pin is equal to the programmed voltage at the IPH pin. The VCO is then adjusted internally (and therefore the frequency) such that the inductor current remains constan...

072DE

FEATURES q Medium breakdown voltage (BVCEO 30V) q Output sink current (IC(max) = 30mA) q Driving available with MOS (PMOS, CMOS) IC output q Low output saturation voltage (VCE(sat) = 0.35V at IC = 20mA) q Wide operating temperature range (Ta = C20 to +75C)

072N35

Vendor:INFINEONPackage Cooled:08+D/C:15000

072V3S

Vendor:Infineon

072V3S

Vendor:Infineon

0731-010-0018

073-2004-3205

073-20821-03

0-73427-2

Vendor:TYCOPackage Cooled:2004/02/25D/C:5224

07378-01