UA305AHCQ

The SC16C554B/554DB is a 4-channel Universal Asynchronous Receiver and Transmitter (QUART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. It comes with an Intel® or Motorola® interface.

UA305AHCQR

Vendor:NSPackage Cooled:CAN

• High efficient InGaN technology • Chromaticity Coordinate categorized according to CIE1931 per packing unit • Luminous intensity ratio in one packing unit IVmax/IVmin 1.6 • Typical color temperature 5500 K • ESD class 1 • EIA and ICE standard package • Compatible with infrared, vapor phase and wave solder processes according to CECC • Available ...

UA305AHM

Vendor:FSCPackage Cooled:CAND/C:08+

The LVTH241 devices are organized as two 4-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is low or 2OE is high, the devices pass noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs are in the high-impedance state.

UA305AHM

Package Cooled:CAN

The LVTH241 devices are organized as two 4-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is low or 2OE is high, the devices pass noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs are in the high-impedance state.

UA305AHMQB

Vendor:FSCD/C:04+

The chip-erase mode can be initiated by a six-byte command sequence. After the command loading cycles, the device enters the internal chip erase mode, which is automatically timed and will be completed in 50 mS. The host system is not required to provide any control or timing during this operation.

UA305CH

Vendor:FD/C:08+

Unique test circuitry and reprogrammable cells allow complete AC, DC, and functional testing during manufacture. As a result, Lat- tice Semiconductor delivers 100% field programmability and func- tionality of all GAL products. In addition, 10,000 erase/write cycles and data retention in excess of 20 years are specified.

UA305HC

Vendor:NS

Features • 8 LVCMOS outputs for processor and other circuitry • Crystal oscillator or external reference input • 25 or 33 MHz Input reference frequency • Selectable output frequencies include = 200, 166, 133,125, 111, 100, 83, 66, 50, 33, or 16 MHz • Buffered reference clock output (2 copies) • Low cycle-to-cycle and period jitter • 100-lead PBGA package • ...

UA305HM

Vendor:FSCD/C:08+

Two Channel Coupler SOIC-8A Surface Mountable Package Standard Lead Spacing of .05 " Available only on Tape and Reel Option (Con- forms to EIA Standard 481-2) • Isolation Test Voltage, 3000 VRMS • Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering • Lead-free component

UA305HM

Vendor:FSCD/C:08+

Two Channel Coupler SOIC-8A Surface Mountable Package Standard Lead Spacing of .05 " Available only on Tape and Reel Option (Con- forms to EIA Standard 481-2) • Isolation Test Voltage, 3000 VRMS • Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering • Lead-free component

UA305LHC

Package Cooled:CAN

The HY62SF16201A is a high speed, low power and 2M bit full CMOS SRAM organized as 131,072 words by 16bit. The HY62SF16201A uses high performance full CMOS process technology and designed for high speed low power circuit technology. It is particularly well suited for used in high density low power system application. This device has a data retention mode that guarantees data to remain valid at a minimum po...

UA305MH

Vendor:FSCPackage Cooled:N/AD/C:3560

UA306

Vendor:FPackage Cooled:CAN8D/C:00+

• These diodes are also available in other case styles and other configurations including: the SOD-123 case with type e3 designation BZT52 series, the dual zener diode common anode configuration in the SOT-23 case with type designation AZ23 series and the dual zener diode common cathode configuration in the SOT-23 case with type designation DZ23 series. • The Zener voltages are gr...

UA306HM

2. The ADS-930 achieves its specified accuracies without the need for external calibration. If required, the device's small initial offset and gain errors can be reduced to zero using the adjustment circuitry shown in Figure 2. When using this circuitry, or any similar offset and gain calibra- tion hardware, make adjustments following warmup. To avoid interaction, always adjust offset before gain...

UA307HMQB

Vendor:FSCD/C:04+

Encoder input and decoder output filters are incorporated on-chip. Sampling clock rates can be programmed to 16, 32, or 64kbps from an internal clock generator or externally injected in the 8 to 64kbps range. The sampling clock frequency is output for the synchronization of external circuits.

UA307HMQB

Vendor:FSCD/C:04+

Encoder input and decoder output filters are incorporated on-chip. Sampling clock rates can be programmed to 16, 32, or 64kbps from an internal clock generator or externally injected in the 8 to 64kbps range. The sampling clock frequency is output for the synchronization of external circuits.

UA307TC

The TL05x family was designed to offer higher precision and better ac response than the TL08x with the low noise floor of the TL07x. Designers requiring significantly faster ac response or ensured lower noise should consider the Excalibur TLE208x and TLE207x families of BiFET operational amplifiers.

UA3086PC

Vendor:FPackage Cooled:DIP/14

supported. Software-configurable for Internet e-mail and web browser functions. Karaoke, On-Screen Display (OSD), Playback Control (PBC) for Video CD 2.0 and 3.0 and trick mode functions supported. VideoCD 1.1, 2.0, Interactive 3.0, Super VCD and Audio CD compatible (SVCD and DVD configurations only). SmartScale™ video scaling supports both X-axis and Y-axis interpolationa and bidirectional NTS...

UA308AHM

Vendor:FSCPackage Cooled:CAND/C:０４＋

R1 (pin 2) One of the two resistance input pins. A temperature dependent resistance is usually connected to this input for heating or under- temperature alarm type applications. When the value of this resistor is greater than the value of the resistance connected to pin 3 (for three successive measurements) the output will be driven high.

UA308AHM

R1 (pin 2) One of the two resistance input pins. A temperature dependent resistance is usually connected to this input for heating or under- temperature alarm type applications. When the value of this resistor is greater than the value of the resistance connected to pin 3 (for three successive measurements) the output will be driven high.

UA308AM

Vendor:1

UA308BHC

Package Cooled:CAN

Outputs Programmable Power Sharing and Budgeting from Two Independent Supplies 0.8 Volt "1% Reference for Low Voltage Outputs 1.5 A Peak Power Drive Switch Blanking for Noise Sensitive Applications through use of ROSC Pin Programmable Frequency, 150 kHz to 750 kHz Operation Programmable Soft Start Cycle−by−Cycle Overcurrent Protection Independent Programmable Current Limits 100% Duty...

UA308H

Vendor:NSPackage Cooled:TOD/C:87+

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. *ESD Ratings ESD Machine Model Protection up to 200 V, Class B ESD Hu...

UA308HM

Vendor:FSCPackage Cooled:CAND/C:０４＋

Immediately following initiation, the IC enters a charge-qualification mode. The bq2000 charge qualifica- tion is based on battery voltage and temperature. If voltage on pin BAT is less than the internal threshold, VLBAT , the bq2000 enters the charge-pending state. This condition indicates the possiblility of a defective or shorted battery pack. In an attempt to revive a fully depleted pack, the bq2000 enab...

UA308HM/883

Package Cooled:CAND/C:00+

UA308TC

Vendor:FUJITSUPackage Cooled:DIP-8

Data is read from the HY29F040A by using stan- dard microprocessor read cycles while placing the address of the byte to be read on the devices address inputs, A[18:0]. The host system must drive the CE# and OE# inputs Low and drive WE# High for a valid read operation to take place. The device outputs the specified array data on DQ[7:0].

UA309KC

Vendor:FSCPackage Cooled:fsc

The SPS product family is specially designed for an off-line SMPS with minimal external components. The SPS consist of high voltage power SenseFET and current mode PWM control- ler IC. PWM controller features integrated fixed oscillator, under voltage lock out, leading edge blanking, optimized gate turn-on/turn-off driver, thermal shut down protection, over volt- age protection, temperature compensated...

UA30CLD25POM1

Vendor:CARLO GAVAZZIPackage Cooled:SENSORD/C:07+

UA310BHC

Package Cooled:CAN

accompanying wiring and circuits must be kept insulated and dry to avoid leakage and corrosion. This is especially true if the circuit may operate at cold temperatures where condensa- tion can occur. Printed-circuit coatings and varnishes such as Humiseal and epoxy paint or dips can be used to ensure that moisture cannot corrode the FM20 or its connections.

UA310C

Vendor:SFCPackage Cooled:CAND/C:689

UA310HM

Vendor:FSCPackage Cooled:CAND/C:08+

The TTL parallel I/O interface may be configured as either a FIFO (configurable for depth expansion through external FIFOs) or as a pipeline register extender. The FIFO configura- tions are optimized for transport of time-independent (asyn- chronous) 8- or 10-bit character-oriented data across a link. A Built-In Self-Test (BIST) pattern generator and checker allows for testing of the high-speed serial ...

UA310HM

Vendor:FSCD/C:08+

The TTL parallel I/O interface may be configured as either a FIFO (configurable for depth expansion through external FIFOs) or as a pipeline register extender. The FIFO configura- tions are optimized for transport of time-independent (asyn- chronous) 8- or 10-bit character-oriented data across a link. A Built-In Self-Test (BIST) pattern generator and checker allows for testing of the high-speed serial ...

UA310HMQB

Vendor:FSCPackage Cooled:CAND/C:08+

International Rectifier radiation hardened HEXFETs have been characterized in neutron and heavy ion Single Event Effects (SEE) environments. The ef- fects on bulk silicon of the type used by Interna- tional Rectifier on RAD HARD HEXFETs are shown in figure 6. Single Event Effects characterization is shown in Table 3.

UA310HMQB

Vendor:FSCPackage Cooled:CAND/C:08+

International Rectifier radiation hardened HEXFETs have been characterized in neutron and heavy ion Single Event Effects (SEE) environments. The ef- fects on bulk silicon of the type used by Interna- tional Rectifier on RAD HARD HEXFETs are shown in figure 6. Single Event Effects characterization is shown in Table 3.

UA310MH

Vendor:NSCD/C:08+

(MAX2338 EV kit, VCC = +2.7V to +3.3V, fPLNAIN = fPMIXIN = 1930MHz to 1990MHz, fCLNAIN = fCMIXIN = 869MHz to 894MHz, fIF = 183MHz, high side LO, LO/2 = LOW. All ports matched to 50Ω, RRLNA = RRBIAS = 24kΩ, TA = -40C to +85C. Typical values are at TA = +25C, VCC = +3.0V, unless otherwise noted.)

UA311AHM

Vendor:FSCD/C:08+

The high-resolution (HR) SHARE feature allows even HR pins to share the next higher odd HR pin structures. This HR sharing is independent of whether or not the odd pin is available externally. If an odd pin is available externally and shared, then the odd pin can only be used as a gen- eral-purpose I/O. For more information on HR SHARE, see the TMS470R1x High-End Timer (HET) Reference Guide (literature nu...

UA311HM

Package Cooled:CAN

3.3V Operation with 5V Tolerant Buffers ACPI 1.0b/2.0 and PC99a/PC2001 Compliant LPC Interface with Clock Run Support Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems 15 Direct IRQs Three 8-Bit DMA Channels ACPI SCI Interface nSMI Shadowed write only registers LPC/Firmware Hub Host Flash Interface Single Byte FWH Memory Read and FWH Memory Write Support FWH ID Supp...

UA311HMQB

Vendor:FSCD/C:08+

The EL4583 sync slice level is set to the mid-point between sync tip and the blanking level. This 50% point is determined by two internal sample and hold circuits that track sync tip and back porch levels. It provides hum and noise rejection and compensates for input levels of 0.5V to 2.0VP-P.

UA311LHC

Package Cooled:CAN

Note: 1. This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical on state resistance of the switch and a load capacitance of 50pF, when driven by an ideal voltage source (zero output impedance).

UA311TC

bit segment and a 128 bit segment. The 64 bit seg- ment contains a unique device number written by ST, while the second one is one-time-programma- ble by the user. The user programmable segment can be permanently protected. Figure 7., shows the Protection Register Memory Map. The KRYPTO Protection Register is used to man- age the Modify and Read protection modes. It also features a Device Authentic...

UA311TC

Package Cooled:DIP

bit segment and a 128 bit segment. The 64 bit seg- ment contains a unique device number written by ST, while the second one is one-time-programma- ble by the user. The user programmable segment can be permanently protected. Figure 7., shows the Protection Register Memory Map. The KRYPTO Protection Register is used to man- age the Modify and Read protection modes. It also features a Device Authentic...

UA317H

UA317KC

Vendor:FSCPackage Cooled:CAN2D/C:86+

High Efficiency: Up to 95% Very Low Quiescent Current: Only 40µA 2.25MHz Constant Frequency Operation High Switch Current: 1.2A on Each Channel No Schottky Diodes Required Low RDS(ON) Internal Switches: 0.35Ω Current Mode Operation for Excellent Line and Load Transient Response Short-Circuit Protected Low Dropout Operation: 100% Duty Cycle Ultralow Shutdown Current: IQ < 1µA Output V...

UA317UC

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are ref- erenced to SOURCE lead. (TAmbient = 25oC unless otherwise specified). PCB mounting uses the standard footprint with 70 µm copper thickness.

UA318HM

Vendor:FSCPackage Cooled:CAN8D/C:08+

The UA318HM is a high speed, super low power and 4Mbit full CMOS SRAM organized as 256K words by 16bits. The UA318HM uses high performance full CMOS process technology and is designed for high speed and low power circuit technology. It is particularly well-suited for the high density low power system application. This device has a data retention mode that guarantees data to remain valid at a minimum power...

UA318HMQB

Vendor:FSCPackage Cooled:CAN8D/C:08+

GLA/GLB/GLC Low-side, gate-drive outputs for external NMOS drivers. External series-gate resistors (as close as possible to the NMOS gate) can be used to control the slew rate seen at the power-driver gate, thereby controlling the di/dt and dv/dt of the SA/SB/SC outputs. Each output is designed and specified to drive a 1000 pF load with a rise time of 50 ns.

UA323

When VPP is low (VPP = V PPL), the contents of the command latch are fixed to 00H, and the device is in read-only mode. When VPP is high (VPP = VPPH), the device enters read/write mode. The device operations are selected by writing specific software command into the command latch.

UA323FM

Package Cooled:QFND/C:05+

The ICS557-03 is a spread spectrum clock generator supporting PCI-Express and Ethernet requirements. The device is used for PC or embedded systems to substantially reduce electromagnetic interference (EMI). The device provides two differential (HCSL) spread spectrum outputs. This device is pin configured to select spread and clock selection. Using ICS patented Phase-Locked Loop (PLL) techniques, the ...

UA324DC

Vendor:FPackage Cooled:DIPD/C:83+

The MAX4104/MAX4105/MAX4304/MAX4305 op amps feature ultra-high speed, low noise, and low distortion in a SOT23 package. The unity-gain-stable MAX4104 requires only 20mA of supply current while delivering 625MHz bandwidth and 400V/µs slew rate. The MAX4304, compensated for gains of +2V/V or greater, delivers a 730MHz bandwidth and a 1000V/µs slew rate. The MAX4105 is compensated for a minimum gain...

UA324DC

Vendor:N/APackage Cooled:DIP

The MAX4104/MAX4105/MAX4304/MAX4305 op amps feature ultra-high speed, low noise, and low distortion in a SOT23 package. The unity-gain-stable MAX4104 requires only 20mA of supply current while delivering 625MHz bandwidth and 400V/µs slew rate. The MAX4304, compensated for gains of +2V/V or greater, delivers a 730MHz bandwidth and a 1000V/µs slew rate. The MAX4105 is compensated for a minimum gain...

UA32866

• NPT3 IGBT - low saturation voltage - positive temperature coefficient for easy paralleling - fast switching - short tail current for optimized performance in resonant circuits • optional HiPerFREDTM diode - fast reverse recovery - low operating forward voltage - low leakage current • TO-247 package - industry standard outline - epoxy meets UL 94V-0

UA3302DC

Package Cooled:DIPD/C:81+

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property o...

UA3302DC

Vendor:ＦＳＣPackage Cooled:DIPD/C:DIP

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property o...

UA3303S

Vendor:FSCPackage Cooled:SOP-14D/C:85+

Note 1: Limits are 100% production tested at TA = +25C. Limits over the operating temperature range are guaranteed by design. Note 2: The dropout voltage is defined as VIN - VOUT, when VOUT is 4% lower than the value of VOUT when VIN = VOUT + 0.5V.

UA330897D

Vendor:ICSPackage Cooled:TSSOP/48D/C:03+

Removed 166MHz part from speed bin Defined IDD specification Defined AC parameters of 250MHz part Changed Pin Capacitance a) Input Clock capacitance : Changed from 2/3pF to 1.7/2.7pF (min/max) b) All other Input-only pins capacitance : Changed from 2/3pF to 1.7/2.7pF (min/max) c) Input/Output capacitance (DQ, DQS, DM) : Changed from 4/5pF to 3.7/4.7pF (min/max) 5) Changed some AC parameters a) ...

UA332030

Vendor:ICSPackage Cooled:SOP

UA334FK

Package Cooled:LCCD/C:04+

Built-in H and V drivers (built-in input level conversion circuit, TTL drive possible) High quality picture representation with RGB delta arranged color filters Full-color representation NTSC/PAL compatible Right/left inverse display function

UA335FM

Package Cooled:LCCD/C:04+

Allows Safe Board Insertion and Removal from a Live Backplane Adjustable Analog Current Limit with Circuit Breaker Fast Response Limits Peak Fault Current Automatic Retry or Latch Off On Current Fault Adjustable Supply Voltage Power-Up Rate High Side Drive for External MOSFET Switch Controls Supply Voltages from 2.7V to 16.5V Undervoltage Lockout Adjustable Overvoltage Protection Low Profile (1mm) SOT-23...

UA339PC

Vendor:120

The IN74AC14 is identical in pinout to the LS/ALS14, HC/HCT14. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. The IN74AC14 is useful to square up slow input rise and fall times. Due to the hysteresis voltage of the Schmitt trigger, the IN74AC14 finds applications in noisy environments. • Outputs Directly Interface to C...

UA3401PC

UA3403DC

Vendor:NSPackage Cooled:07+D/C:CDIP14

UA3403PC

Package Cooled:DIP

The signal current at the input flows into the summing node of a high-gain amplifier. Shunt feedback through the resistor RF converts this current to a voltage. In par- allel with the feedback are two back-to-back Schottky diodes that clamp the output signal for large input cur- rents as shown in Figure 2.

UA341598

The LMV321/358/324 are the most cost effective solutions for the applications where low voltage operation, space sav- ing and low price are needed. They offer specifications that meet or exceed the familiar LM358/324. The LMV321/358/ 324 have rail-to-rail output swing capability and the input common-mode voltage range includes ground. They all ex- hibit excellent speed-power ratio, achieving 1MHz of ba...

UA341FM

Vendor:AgilentPackage Cooled:QFND/C:05+

Environment Design guidelines for eco-friendly products in respect to material and recycling Environmentally friendly product and ISO14001 certified manufacturing: no dangerous waste during production, lead-free printed circuit board (PCB) and soldering process, significant reduction of lead and halogens to a minimum

UA3487PC

Vendor:FPackage Cooled:DIPD/C:87

The M29W320E is a 32 Mbit (4Mb x8 or 2Mb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be per- formed using a single low voltage (2.7 to 3.6V) supply. On power-up the memory defaults to its Read mode. The device features an asymmetrical block archi- tecture. The M29W320E has an array of 8 param- eter and 63 main blocks. M29W320ET locates the Parameter Blo...

UA348CP

UA3512-A

Vendor:UAPackage Cooled:N/AD/C:9+

UA3540

Vendor:PHILIPSPackage Cooled:00D/C:750

The highest count of the various modes is shown in the Extended Counter Range column. Control inputs Kb and Kc can be used to initiate and lock the counter in the master preset state. In this condition the flip-flops in the counter are preset in accordance with the jam inputs and the counter remains in that state as long as Kb and Kc both remain low. The counter begins to count down from the preset st...

UA3540

Vendor:PHILIPSPackage Cooled:TSSOPD/C:00+

The highest count of the various modes is shown in the Extended Counter Range column. Control inputs Kb and Kc can be used to initiate and lock the counter in the master preset state. In this condition the flip-flops in the counter are preset in accordance with the jam inputs and the counter remains in that state as long as Kb and Kc both remain low. The counter begins to count down from the preset st...

UA355HC

Vendor:CAN8Package Cooled:CAN8D/C:FSC

UA356HC

Vendor:CANPackage Cooled:NA

2. Stand-by SW function By means of controlling pin(4) (stand-by terminal) to high and low, the power supply can be set to on and off. The threshold voltage of pin(4) is set at 2.1V (3VBE), and the power supply current is about 1µA (typ.) at the stand-by state.

UA356HC

D/C:1200

2. Stand-by SW function By means of controlling pin(4) (stand-by terminal) to high and low, the power supply can be set to on and off. The threshold voltage of pin(4) is set at 2.1V (3VBE), and the power supply current is about 1µA (typ.) at the stand-by state.

UA360W1R-V1.0

Vendor:HOLTEKPackage Cooled:SMDD/C:00+

CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD8021 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid perfo...

UA360WIR-V1.0

Vendor:HOLTEKPackage Cooled:01+D/C:DIP

The MAX6902 SPI™-compatible real-time clock contains a real-time clock/calendar and 31 x 8 bits of static random-access memory (SRAM). The real-time clock/calendar provides seconds, minutes, hours, day, date, month, year, and century information. A time/date programmable polled ALARM is included in the MAX6902. The end-of-the-month date is automatically adjusted for months with fewer than 31 days, incl...

UA3680DC

Vendor:FSCPackage Cooled:CDIP

The HIP6017 provides the power control and protection for three output voltages in high-performance microprocessor and computer applications. The IC integrates a PWM controller, a linear regulator and a linear controller as well as the monitoring and protection functions into a single 28 lead SOIC package. The PWM controller regulates the microprocessor core voltage with a synchronous-rectified ...

UA3680PC

Vendor:FPackage Cooled:DIP/14

The TO-220 Fullpak eliminates the need for additional insulating hardware in commercial-industrial applications. The moulding compound used provides a high isolation capability and a low thermal resistance between the tab and external heatsink. This isolation is equivalent to using a 100 micron mica barrier with standard TO-220 product. The Fullpak is mounted to a heatsink using a single clip or by a single ...

UA3748CT

Vendor:SFCPackage Cooled:CAND/C:540

UA3748CT

Vendor:SFCPackage Cooled:CAND/C:540

UA3748T

Vendor:FSCPackage Cooled:CAND/C:03+

UA374HC

D/C:2200

1. Each side of device measured separately. 2. MTTF calculator available at http://www.freescale.com/rf. Select Tools/Software/Application Software/Calculators to access the MTTF calculators by product. 3. Refer to AN1955/D, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955.

UA374HMQB

UA3777

Package Cooled:7

These ChipLEDs come either in two top emitting packages (HSMx-C170/C190/C191/C150) or in a side emitting package (HSMx-C110). The right angle ChipLEDs are suitable for applications such as LCD back- lighting. The top emitting ChipLEDs with wide viewing angle are suitable for light piping and direct backlighting of keypads and panels. In order to facilitate pick and place opera- tion, these...

UA381HC

Vendor:N/APackage Cooled:N/AD/C:N/A

UA381HC

Vendor:N/APackage Cooled:CAND/C:N/A

UA387A078N

• Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • High case dielectric strength of 1500 VRMS • Ideal for printed circuit boards • Glass passivated chip junction • High surge current capability

UA398HC

Vendor:8D/C:N/A

In addition, this family is immune to the effects of parasitic capacitance and can drive large capacitive loads. This provides Printed Circuit Board (PCB) layout design flexibility by enabling the device to be remotely located from the microcontroller. Adding some capacitance at the output also helps the output transient response by reducing overshoots or undershoots. However, capacitive load is not ...

UA3H0022

UA401FM

Package Cooled:QFND/C:05+

1) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + I CC/2 (per FLIP/ FLOP)

UA403FM

Package Cooled:LCCD/C:04+

The HD404618 Series is designed with the powerful and efficient architecture of the HMCS400 family. The MCU incorporates a high-precision dual-tone multifrequency (DTMF) circuit, LCD driver/controller, voltage comparator, and 32-kHz watch oscillator circuit.

UA4052BE

UA407FM

Package Cooled:LCCD/C:04+

UA412FM

D/C:01+

† The TPS75x01 is programmable using an external resistor divider (see application information). The PWP package is available taped and reeled. Add an R suffix to the device type (e.g., TPS75201QPWPREP) to indicate tape and reel. ‡ Product preview

UA4136

Vendor:FPackage Cooled:07+D/C:2080

UA4136DM

Package Cooled:CDIP

ICC1 , ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1, ICC3 and ICC6, address can be changed maximum once while RAS=V IL. In ICC4,

UA4136DMQB

Vendor:FSCD/C:03+04+

*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.

UA413FW

Package Cooled:LCCD/C:04+

The MAX1664 integrates power-supply and backplane drive circuitry for active-matrix thin-film-transistor (TFT) liq- uid crystal displays. Included are a single-output, pulse- width-modulation boost converter (0.25Ω switch), a dual-output (positive and negative) gate-driver supply using one inductor, an LCD backplane driver, and a sim- ple phase-locked loop to synchronize all three outputs. High switchi...

UA415FM

Vendor:N/AD/C:0232+

Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to bette...

UA421FM

Package Cooled:QFND/C:04+

Active Low-Control Input. This is the frame synchronization signal for the input data. When SYNC goes low, it powers on the SCLK and DIN buffers and enables the input shift register. Data is transferred in on the falling edges of the following 16 clocks. If SYNC is taken high before the 16th falling edge, the rising edge of SYNC acts as an interrupt and the write sequence is ignored by the device.

UA422FM

Vendor:AgilentPackage Cooled:QFND/C:05+

Input Channel A No Internal Connection Internal Reference Supply Bias Voltage Common-Mode Voltage Internal Reference Ground No Internal Connection Input Channel B No Internal Connection Do Not Connect Coupling Capacitor Channel B Coupling Capacitor Channel B +5V Supply Channel B Ground Channel B Positive Output Channel B Negative Output Channel B

UA423FM

Vendor:N/APackage Cooled:04+D/C:04+

The channel is set by an on-chip high-speed I2C compatible bus receiver. A Phase-Locked Loop (PLL) tunes the modulator over the full UHF range. The modulator incorporates a sound subcarrier oscillator and uses a second PLL to derive 4.5, 5.5, 6.0, and 6.5MHz subcarrier frequencies. These frequencies are selected using the bus.

UA424FM

Vendor:AgilentPackage Cooled:QFND/C:05+

The 82C37A is designed to be used with an external address latch, such as the 82C82, to demultiplex the most significant 8-bits of address. The 82C37A can be used with industry standard microprocessors such as 80C286, 80286, 80C86, 80C88, 8086, 8088, 8085, Z80, NSC800, 80186 and others. Multimode programmability allows the user to select from three basic types of DMA services, and reconfiguration unde...